Latest updates
-
BLUEFLASHER v.2.5 - build 5123
12/11/2024
- Fixed ADAS license authentication error.
-
BLUEFLASHER v.2.3 - build 4711
05/07/2024
- Added support for Maserati LLR4.
- Added support for HALF Jeep Compass/Renegade.
ATTENTION! It is necessary to update the interface firmware to version 1.35
-
BLUEFLASHER v.2.2 - build 4619
02/04/2024
- Added support for UCONNECT 7".
- Resolved problem with certain proxy models that were not recognized by the program.
- Various stability improvements.
ATTENTION! It is necessary to update the interface firmware to version 1.34
-
BLUEFLASHER v.2.1 - build 4543
24/10/2023
- Fixed U-CONNECT conenctions diagram.
-
BLUEFLASHER v.2.1 - build 4533
17/10/2023
WARNING! It is necessary to update the interface firmware to version 1.33
New U-CONNECT package
(VIN adaptation
on U-CONNECT control units)
For more information click here.
To purchase the software package click here.
- Identification of the control unit,
- PINCODE calculation for unlocking.
- Setting up the new VIN (Unlocking, setting and locking the VIN).
Support for all U-CONNECT control units, both 5" and 7"
-
BLUEFLASHER v.2.0 - build 4342
24/07/2023
WARNING! It is necessary to update the interface firmware to version 1.30
New ABS package
(VIN adaptation
on ABS control units)For more information click here.
To purchase the software package click here.
- Identification of the control unit,
- Revergination of the ECU (Unlocking the VIN and resetting the VIN),
- Setting up the new VIN (Unlocking, setting and locking the VIN).
Support for ABS control units present in the following vehicles:
FIAT Tipo (2014 - 2020)
FIAT 500X (2014 - 2020)
Jeep Renegade (2014 - 2020)
ADAS package update
VIN adaptation on HALF (Jeep Compass) and Blind Spot Module ECUs
For more information press here.
To purchase the prize package directly here.
- Identification of the control unit,
- Revergination of the ECU (Unlocking the VIN and resetting the VIN),
- Setting up the new VIN (Unlocking, setting and locking the VIN).
Support for BSM control units present in the following vehicles:
Alfa Romeo Giulia
Alfa Romeo Stelvio
FIAT 500X (2014 - 2020)
Jeep Renegade (2014 - 2020) -
BLUEFLASHER v.1.9 - build 4275
11/05/2023
- Fixed guided procedure error for Freemont units.
-
BLUEFLASHER v.1.9 - build 4185
05/05/2023
- Added support for new Automotive Art server.
- Fixed an issue that caused the warning in the update panel to be displayed even during the update.
- Fixed server connection problem that caused program crash.
- Various minor improvements.
-
BLUEFLASHER v.1.9 - build 4005
18/04/2023
- Server update.
-
BLUEFLASHER v.1.9 - build 3985
17/04/2023
- Added the ability to remove or add proxy data for 1st generation Blue&Me during the automatic repair procedure.
- Added warning to not connect a new Blue&Me module to Blueflasher when power supply is delivering power.
- Added warning at the end of the automatic repair procedure for Freemont Blue&Mes that the audio test is not available.
- Added power button on top row to stop power delivery to the Blue&Me module during functionality test.
- Removed connection diagram for non supported ADAS modules.
- Improved the search for vehicle data during the CAN test.
- Fixed an error that showed the vehicle model of the previously tested Blue&Me if the next one had no data.
- Various stability improvements.
-
BLUEFLASHER v.1.9 - build 3968
16/02/2023
- Solved problem for 1st generation Blue&Me which did not allow the user to proceed with writing the repair file in the guided procedure.
- Added the ability to write virgin files (no proxi data) in the guided procedure for 2nd generation Blue&Me.
- Fixed error that could cause program crash at the end of the writing procedure.
- Various stability improvements.
-
BLUEFLASHER v.1.9 - build 3959
13/02/2023
New ADAS Package
(VIN adaptation on ACC and HALF ECUs)
For more informations please click here.
To buy the packet please click here.
Supported features:
- Identification of the control unit,
- Revergination of the ECU (Unlocking and resetting the VIN),
- Setting up the new VIN(Unlocking, setting and locking the VIN).
Support for ADAS control units present in the following vehicles:
Alfa Romeo Giulia (2016 - 2020)
Alfa Romeo Stelvio (2016 - 2020)
FIAT 500X (2014 - 2020)
FIAT Tipo (2015 - 2020)
Jeep Renegade (2014 - 2020)ATTENTION! It is necessary to update the interface firmware to version 1.29
-
BLUEFLASHER v.1.8 - build 3563
26/01/2023
- Fixed NAND identification problems for NQ278 models that would cause Blueflasher to disconnect from the pc.
- Fixed error that would sometimes happen when writing a NAND with damaged sectors.
- Fixed reading error that would cause the program to keep reading after reaching the end of the memory.
ATTENTION! It is necessary to update the interface firmware to version 1.27
-
BLUEFLASHER v.1.8 - build 3296
23/12/2022
- Fixed problems in the identification procedure that did not allow the correct continuation of operations due to the disconnection of the BlueFlasher device.
- Added voice recognition test display which allows you to observe Blue&Me behavior as if you were in the vehicle.
- Fixed crash caused by voice test on Blue&Me modules without proxy data in memory.
- Various minor improvements.
-
BLUEFLASHER v.1.8 - build 3108
07/12/2022
- Fixed a bug that prevented the correct program starting,
- Added Car Model identification (only for 2nd Blue&Me generation) in test function,
- Added Virtual display to show display messages during speech test.
WARNING! It is necessary to update the interface firmware to version 1.25
WARNING! If the software does not report the availability of the update, you can download the installation package of the latest application by pressing HERE
-
BLUEFLASHER v.1.8 - build 2742
21/11/2022
- Improved the Audio and Speech Recognition test procedure.
WARNING! It is necessary to update the interface firmware to version 1.24
WARNING! If the software does not report the availability of the update, you can download the installation package of the latest application by pressing HERE
-
BLUEFLASHER v.1.8 - build 2681
17/11/2022
- Fixed a bug that prevented the correct execution of the language change procedure.
-
BLUEFLASHER v.1.8 - build 2658
16/11/2022
New Hardware Version 1.4 BlueFlasher
Only supports Blue&Me second generation and CAN Base test. Supports 1° and 2° generation of Blue&Me, Audio Test, Voice Recognition Test, Steering wheel controls virtualization, language change and update over the counter. You can upgrade your BlueFlasher to the HW version. 1.4. It will come sent only the electronic circuit, the new set of cables, while it will be shipped; the original template is maintained. For all information and updating costs, consult our website https://blueflasher .it
- Added software support for identification/reading/writing and repairing memory K9F5608D0D (32MB) and K9F1208U0C (64MB) mounted in 1° generation. In particular, the K9F5608D0D memory is available. mounted in the most hardware; large ones of fig.1 and in the bigger ones; small with the same form factor as the first generation (fig.2). K9F1208U0C memory is full. instead mounted in the first generation Blue&Me with large card, equipped with the navigator function (fig.3). The repair procedure remains the same.
- Addition of extended functional test, available only with HW version 1.4.
- AUDIO TEST: By means of the loudspeaker mounted on the BlueFlasher, the Blue&Me control unit is prompted to emit a test sound which verifies the functioning of the audio component.
- VOICE RECOGNITION TEST: Using the BlueFlasher's built-in speaker and microphone, it is possible to test the voice recognition. possible, simulate pressing the Windows key on the vehicle's steering wheel controls. In this way it is It is possible to issue voice commands and listen to the response of the Blue&Me voice generator. Through this test, the complete functioning of the audio component, the microphone and the speech synthesizer is verified.
- LANGUAGE CHANGE FUNCTION: Available only with HW 1.4 version; it is The language change has been integrated directly at the counter for all first and second generation Blue&Me. (On the other hand, in the Blue&Me Freemont it is possible to change the language directly from the vehicle display). The procedure is completely automatic and provides only for the selection of the language; The presence of the USB key on the BlueFlasher allows the operation to be carried out on the bench and via the loudspeaker it is possible to carry out the operation on the bench. You can also check the progress of the process.
- BLUE&ME FIRMWARE UPDATE FUNCTION:
- Available only with HW 1.4 version; it is The possibility has been integrated; to update the Blue&Me firmware to the latest version available. The procedure is totally automatic and provides for the download of the software from our server. The presence of the USB key on the BlueFlasher allows the operation to be carried out on the bench and via the loudspeaker it is possible to carry out the operation on the bench. You can also check the progress of the process.
Blue&Me First generation - Large card, without Navigator, memory K9F5608D0D 
Blue&Me First generation Small card, K9F5608D0D memory 
Blue&Me First generation - Large card, with Navigator, memory K9F1208U0C WARNING! It is necessary to update the interface firmware to version 1.23
-
BLUEFLASHER v.1.7 - build 2515
14/06/2022
- Fixed NAND identification problems.
- Removed download of repair files on first program launch. The files necessary for the current repair operation will be downloaded from the Automotive Art server before starting the writing in the wizard.
- Fixed crash caused by NW190 identification following deletion.
- Fixed crash caused by unstable internet connection while repairing file in wizard.
- Reached 250 different versions for repair files, all available in italian, english, french, spanish and portuguese.
ATTENTION! It is necessary to update the interface firmware to version 1.22
-
BLUEFLASHER v.1.6 - build 2462
03/06/2022
- NW190 memory support re-enabled.
- Re-enabled support for faster reading.
ATTENTION! It is necessary to update the interface firmware to version 1.21
-
BLUEFLASHER v.1.5 - build 2411
30/05/2022
We're sorry for the problems caused by the latest versions released.
This update removes the following features:
- Support for NW190 memories.
- Faster reading procedure.
This allows all users to keep working with BlueFlasher while we investigate the issue.
We are doing our best to resolve it in the shortest time possible.
ATTENTION! It is necessary to update the interface firmware to version 1.20
-
BLUEFLASHER v.1.5 - build 2145
23/05/2022
- Solved problem introduced in the last update that didn't allow the identification procedure to work on some versions of BlueFlasher.
ATTENTION! It is necessary to update the interface firmware to version 1.19
-
BLUEFLASHER v.1.5 - build 2109
19/05/2022
- Added software support for the identification/reading/writing/repair of the NW190 memory mounted in the FIAT Freemont and Chrysler Blue&Me. The repair procedure remains the same.
- Added the possibility to select the language of the Blue&Me module during the repair procedure, without having to change it with a USB key in the vehicle. The files in the various languages ??will be added over time. The language selection occurs before writing the repaired file.
- Improved reading speed for all Blue&Me modules by 20/25%
- Missing repair file check moved to the start of the repair procedure. Added progression bar for the remaining files that have to be downloaded.
- Error/login/download windows are no longer shown on top of the whole desktop, only on top of the BlueFlasher program window.
- Improved speed for file selection/repair in the guided repair procedure.
- It is now possible to retry any step in the guided repair procedure in the event of an error.
- Added logout button on the top bar of the main window.
- Left expandable menu is now working correctly.
- Various improvements to the program stability.
ATTENTION! It is necessary to update the interface firmware to version 1.18
-
BLUEFLASHER v.1.4 - build 1856
31/03/2022
- Various improvements.
-
BLUEFLASHER v.1.4 - build 1849
23/03/2022
- Modified writing function with new procedure that includes identification e functionality test of the flash memory.
- Fixed rare bug that stopped the writing procedure after the erasure was done.
- Improved proxi data detection system when reading the flash memory.
- Improved FIAT drawing and software version detection system.
- Improved repair file selection system when using the repair wizard.
- Added message informing the user when the file required for the repair wizard has not yet been downloaded.
- Program stability improvements in case of cancellation of the current operation by the user.
- Fixed various minor bugs.
-
BLUEFLASHER v.1.4 - build 1778
23/02/2022
- Various improvements.
-
BLUEFLASHER v.1.4 - build 1637
02/02/2022
- Added the CAN test for the old Lancia Delta, Fiat Bravo ... with 11 Bit CAN protocol.
- Fixed software startup problem on some versions of Windows 10. Now all versions of Windows 10 are supported.
- Added 10 other working files for the automatic repair of the Blue & Me that bring the total to more than 80 repair files!
ATTENTION! It is necessary to update the interface firmware to version 1.16
-
BLUEFLASHER v.1.3 - build 1539
26/01/2022
- Added software support for identifying/ reading/writing and repairing the SAMSUNG K9F1G08R0B memory mounted in the first Blue&Me products. The repair procedure remains the same.
- Reached 70 working files for the automatic repair of the Blue&Me!
ATTENTION! It is necessary to update the interface firmware to version 1.15
-
BLUEFLASHER v.1.2 - build 1492
20/01/2022
- Various improvements.
ATTENTION! It is necessary to update the interface firmware to version 1.14
-
BLUEFLASHER v.1.2 - build 1225
07/01/2022
- Various improvements.
-
BLUEFLASHER v.1.2 - build 1223
05/01/2022
- Added initial "What's New" section where you can find out what has been improved and added within the software.
- Added "Frequently Asked Questions" section accessible by pressing the "?" (question mark) at the top right (next to the language change key). In this section you can consult all the frequently asked questions that help in the operation of the software. This section will be enriched as interesting questions come from you.
- In the wizard it is now possible to repeat the step if there has been an error, without having to restart the procedure.
- Added about 50 working files for the automatic repair of the Blue&Me!
ATTENTION! It is necessary to update the interface firmware to version 1.13
-
BLUEFLASHER v.1.2 - build 1045
15/12/2021
- New CAN test procedure, faster and more efficient!,
- Stability improvements.
ATTENTION! It is necessary to update the interface firmware to version 1.11